|
|
| |
|
|
|
|
|
|
|
| |
|
|
Here is the partial chart of Aerotech nozzle sizes, the few I have checked were correct.
| Reload |
Nozzle throat diam |
| H73 |
0.125 |
| G75 |
0.156 |
| H112 |
0.159 |
| H128 |
0.167 |
| I195 |
0.180 |
| H97 |
0.187 |
| H123 |
0.187 |
| H180 |
0.203 |
| H238 |
0.219 |
| I161 |
0.226 |
| H242 |
0.234 |
| I211 |
0.260 |
| I357 |
0.281 |
| I284 |
0.281 |
| J350 |
0.292 |
| I300 |
0.312 |
| I435 |
0.315 |
| J570 |
0.360 |
Submitted by: Steve Pearson
Too often, AeroTech reload kits are packed with an incorrect nozzle. Using
the reload with the wrong nozzle can cause it to under perform or even to
CATO. Before you build that next AeroTech reload, check to make sure the
right nozzle is packed in the kit. Measure the diameter of the nozzle and
compare it to that listed in the table.
| Opening |
Reloads |
| Small Exit Diameter |
| 0.104 |
F37W |
| 0.125 |
F62T |
| 0.136 |
G54W, G61W |
| Medium Exit Diameter |
| 0.141 |
H73J |
| 0.156 |
G75J |
| 0.161 |
H112J |
| 0.172 |
G104T, G79W |
| 0.177 |
H97J, H242T |
| Large Exit Diameter |
| 0.180 |
H128W, H165R, H123W, H148R, I154J, I195J |
| 0.213 |
H180W, H210R |
| 0.228 |
H238T, I161W, I218R |
| 0.266 |
H220T, I357T, I211W, I285R, I284W |
| 0.313 |
I300T |
| Opening |
Reloads |
| 0.291 |
I200W, H268R, I366R, I600R, J350W, J420R |
| 0.313 |
I435T |
| 0.359 |
J570W |
| Center |
Outer |
Reload |
| 0.266 |
|
J90W |
| 0.213 |
3@ 0.161 |
J180T |
| 0.228 |
2@ 0.161 |
J275W, J315R, J135W |
| 0.250 |
3@ 0.196 |
J460T |
| 0.234 |
3@ 0.182 |
J415W, J540R |
| 0.250 |
6@ 0.188 |
J800T |
| 0.250 |
3@ 0.161 |
K185W |
| 0.266 |
3@ 0.213 |
K550W |
| 0.297 |
6@ 0.220 |
K1100T |
| 0.266 |
6@ 0.199 |
K700W |
| Opening |
Reload |
| 0.455 |
K695R |
| 0.562 |
K1275R |
Submitted by: John Lyngdal |
|
|
Welcome to the NEW Info-Central! We are in the process of moving servers, updating content, and re-organizing our entire site to give you better access to the information you need, and current information including the latest and greatest from rocketeers who have proven that they know what they are doing, and those the push the envelope on what this hobby knows, and how it's done.
Please excuse our mess in the mean time. We appreciate your patience as we get settled in, and everything gets re-arranged. As always, if you have any comments, questions, suggestions, or would like to submit content to us, you can do so through our contact form.
-- Info-Central
|
|
| |
|
back to top |
|
|
|
| |
